Product ID:CPW 1961
MSDS Date:07/11/1988
FSC:6505
NIIN:00N019670
MSDS Number: BPCJM

WEAR CONTROL TECHNOLOGY INC

40-40 172ND ST
FLUSHING, NY 11358-9981
US

Emergency Phone: 718-762-4040

Info Phone: 718-762-4040

Cage: 1V724

WEAR CONTROL TECH INC

FLUSHING, NY 11358-9981 US

Telephone: 718-762-4040

Cage: 1V724

ALSO, FROM AWS IS F1.3 "EVALUATING CONTAMINANTS IN

RTECS: 9999999ZZ

GIVES ADDITIONAL ADVICE ON SAMPLING. AT A MINIMUM THE

RTECS: 9999999ZZ

AREA. TRAIN THE WORKER TO KEEP HIS/HER HEAD OUT OF THE

RTECS: 9999999ZZ

FILTER LENS. PROVIDE PROTECTIVE SCREENS & GOGGLES,

RTECS: 9999999ZZ

10 MG/M3 METAL DUST; 5 PYRO

CAS: 7429-90-5

RTECS: BD0330000

OSHA PEL 15MG/M3 DUST;5 FUME

ACGIH TLV: SEE INGREDIENT NAME

MAY INCL CO & CO*2. OZONE & NITROGEN OXIDES MAY

RTECS: 9999999ZZ

HELMET IF WORN OR IN WORKERS BRTHG ZONE. SEE

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:FUMES, GASES & DUST CAN BE DANGEROUS
TO YOUR HEALTH. ACUTE: OVEREXPOS TO FUMES, GASES & DUSTS MAY RSLT
IN DISCOMFORT SUCH AS DIZZ, NAUSEA & DRYNESS OR IRRIT OF NOSE,
THROAT & EYES. CHRONIC: OVEREXPOS TO FUMES, GASES & DUST MAY LEAD
TO SIDEROSIS (IRON DEPOSIT IN LUNGS) & MAY AFFECT PULM FUNCTIONS.
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:RADIATION CAN INJURE EYES & BURN SKIN.
REFER TO ORIGINAL MSDS FOR SPECIFIC HAZARDS OF INDIVIDUAL
INGREDIENTS .
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL:REMOVE TO WELL-VENTILATED AREA. CALL FOR MEDICAL AID.
EMPLOY FIRST-AID TECHNIQUES RECOMMENDED BY THE AMERICAN RED CROSS.
INGEST:CALL MD IMMEDIATELY . EYES:IMMEDIATELY FLUSH W/POTABLE WATER
FOR A MINIMUM OF 15 MINS. SEEK ASSISTANCE FROM MD . SKIN:FLUSH
W/COPIOUS AMOUNTS OF WATER. CALL MD .

Flash Point:NON-FLAMMABLE
Extinguishing Media:DO NOT USE WATER, INSTEAD USE DRY SAND OR CLASS D
EXTINGUISHER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NON-FLAMM UNDER NORM WORKING CNDTNS.
METAL PWDR DUSTS MAY PRESENT FIRE/EXPLOS HAZ UNDER FAVORABLE CNDTNS
OF PARTICLE SIZE, DISPERSION & STRONG IGNIT (SUPP DATA)

Spill Release Procedures:CLEAN UP BY VACUUMING, WET DUSTMOP OR WET
CLEAN-UP. AVOID DUST GENERATION. USE AN APPROP FILTER W/VACUUM
EQUIP TO PVNT AIRBORNE DUST LEVELS WHICH EXCEED PEL/TLV. IF
AIRBORNE DUST IS GENERATED, USE AN APPROP NIOSH/MSHA APPROVED RESP
DURING CLEANUP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE & USE POWDER AWAY FROM WATER,
ACIDS, ALKALI, HALOGENS & OTHER COMBUSTIBLE MATERIALS. MAINTAIN
EXPOSURE BELOW THE GIVEN PEL/TLV.
Other Precautions:USE INDUS HYGIENE MONITORING TO ENSURE THAT USE OF
PROD DOES NOT CREATE EXPOS EXCEEDING PEL/TLV. ONE RECOM WAY TO
DETERM COMPOSITION & QTY OF FUMES, GASES & DUSTS WHICH WORKERS ARE
EXPOSED IS TO TAKE AN AIR SAMPLE INSIDE WORKERS (ING 3)

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRABLE FUME
RESPIRATOR OR AIR SUPPLIED RESPIRATOR WHEN WORKING IN CONFINED
SPACE OR WHERE LOCAL EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE
BELOW THE RECOMMENDED EXPOSURE LIMIT.
Ventilation:USE ENOUGH GEN VENT & LOC EXHST AT WORK SITE TO KEEP FUMES,
GASES & DUSTS FROM WORKER'S BRTHG ZONE & GEN (ING 6)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:WEAR HELMET OR USE FSHLD WITH (ING 7)
Other Protective Equipment:MAY INCLUDE ARM PROTECTORS, APRONS, HATS,
SHOULDER PROTECTION, AS WELL AS DARK SUBSTANTIAL CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ:SOURCE. POWDER FORMS EXPLOSIVE MIXTURES IN AIR. ELECTRICALLY
GROUND/BOND ALL EQUIPMENT & CONTRS. KEEP AWAY FROM ALL SOURCES OF
IGNITION. HAZ DECOMP PROD:THOSE FROM BASE METAL & COATING, ETC.
REASONABLY EXPECTED CONSTITUENTS OF FUME WOULD INCLUDE ALUMINUM
OXIDES. GASEOUS REACTION PRODUCTS (ING 2)

HCC:N1
Appearance and Odor:POWDER.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:ELECTRICALLY GROUND/BOND ALL EQUIP &
CONTRS. KEEP AWAY FROM ALL SOURCES OF IGNITION. POWDER FORM EXPLOS
MIX IN AIR.
Hazardous Decomposition Products:DECOMP PRODS OF NORM OPERATION INCL
THOSE ORIGINATING FROM VOLATILIZATION, RXN OR OXIDATION OF INGREDS,
PLUS (SUPP DATA)

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
W/FEDERAL, STATE & LOC AL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.